Surface Enhancement

• Minimal to slight enhancement with matte finish - the extent of enhancement is dependent on the surface

Joint Stabilization

• Hardens joint sand which reduces sand washout, weeds and insect infestation

Surface Protection

• Guards against salt, mild acid, alkali and other corrosives
• Provides stain resistance which makes cleaning and maintenance easier
• Antifungal film protection protects sealer film from mold, moss and algae

Hardens Joint Sand

• Prevents sand erosion and deters weeds/insects

One Easy Application

• Protects surface and stabilizes sand joints in one application

Surface Appearance Freshener

• Locks in a clean, natural look with matte finish

Advanced Single Component, Acrylic Co-Polymer Formula

• Will not yellow under exposure to sunlight
• Offers long term durability

Fungal Guard

• Added antifungal protects sealer film from mold, moss and algae

Breathable, Immediate Application

• Will not trap naturally occurring efflorescence and/or moisture
• Can be applied on a new, clean and dry surface without waiting

Film Forming, Water Based, LOW VOC Sealer

• Consistency of water, milky white in appearance when applied. Dries clear.
• Environmentally friendly, EPA compliant

Temperature Stable

• Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to 180°F (82°C)

Concrete

Stamped Concrete

Concrete Wall Block

Clay Pavers

Natural Stone

Manufactured Stone

Travertine

Exposed Aggregate

Not recommended for marble, granite, ceramic tile and polished, honed or high gloss surfaces as they do not have enough surface texture to absorb the sealer.

PERFORM A TEST IN A SMALL AREA TO VERIFY PERFORMANCE AND APPEARANCE BEFORE APPLYING. Due to the variability and physical make-up of natural stone this step is required to verify desired performance and appearance.

• Low pressure, high volume sprayer such as an airless sprayer or hand held pump-up sprayer
• Slit foam roller
• Foam squeegee for joint stabilization
• Paint shield

Sealing With Joint Stabilization

• 80-120 square feet
• 7.4-11.1 square meters

Sealing Only Without Joint Stabilization

• 150-250 square feet
• 13.9-23.2 square meters

Coverage based on single application. Actual coverage may vary depending on the type, age, condition, joint size and porosity of the surface, application method and other local conditions such as temperature and humidity. For more uniform coverage or if desired a light second coat may be applied after the first coat has dried to the touch.

• Flood Coat & Squeegee Application for Joint Stabilizing Sealers
• Joint Sand Installation
• Spray & Back Roll Application for Sealing without Joint Stabilization
• Four Steps to Surface Restoration

For all of our cleaning and sealing videos, please visit our Resource Library.

For more info or questions regarding this product, please contact us.